120t Overhead Cranes for Indonesia Thermal Power Plant
Henan Mine Crane 120t bridge crane lifting major generating-unit equipment during thermal power plant construction.
Thermal power projects require dependable turbine-hall cranes for installation and later maintenance of generators, turbines and other major equipment. For EPC contractors and plant owners, the crane must arrive on schedule, fit the turbine-building geometry and provide stable, accurate lifting during unit erection.
Henan Mine Crane supplied two 120t new-type double-girder overhead cranes for a thermal power project in Morowali, Central Sulawesi, Indonesia. The cranes supported installation of three 380 MW supercritical, once-reheat condensing coal-fired generating units.
Project Background
Power-plant crane procurement must be coordinated with civil construction, turbine-generator delivery and erection sequencing. Span, hook approach, lifting height and runway loads affect both the crane and the turbine-hall building.
After commissioning, the same crane often remains a key maintenance asset, so accessibility, spare parts, inspection and long-term reliability should be considered during initial procurement rather than only during construction.
Customer Challenges
- Lifting and positioning heavy turbine-generator equipment during unit erection.
- Coordinating crane delivery with an international EPC project schedule.
- Maintaining smooth motion and accurate placement around expensive rotating equipment.
- Providing sufficient hook approach and lifting height inside the turbine hall.
- Ensuring the crane remains useful for long-term maintenance after plant commissioning.
Henan Mine Crane Solution
The referenced project uses two 120t new-type double-girder overhead cranes. The source project emphasizes safe and reliable operation, smooth travel and accurate positioning during installation of the three generating units.
For a similar thermal-power project, Henan Mine Crane can configure capacity, span, lifting height, main and auxiliary hooks, speeds and maintenance access from the turbine-generator erection plan and workshop drawings.
The project scope can also coordinate manufacturing and delivery batches with the buyer's international construction schedule.
| Recommended Crane |
120t Double-Girder Overhead Crane |
| Referenced Quantity |
2 crane sets |
| Power Project |
3 × 380 MW generating units |
| Application |
Turbine-generator installation and power-plant maintenance |
| Design Focus |
Safe operation, smooth travel, accurate positioning and project delivery coordination |
Heavy turbine-generation equipment being positioned beneath the power-station overhead crane.
|
Project view of heavy turbine equipment being lifted inside the power-station construction area.
|
Site team coordinating accurate placement of a large generating-unit component during construction.
|
Key Technical Features
120t-Class Power Plant Lifting
The referenced cranes support installation of major generating-unit equipment.
Stable Double-Girder Structure
Double-girder construction provides the stiffness and trolley arrangement needed for heavy turbine-hall work.
Smooth Operating Motion
Controlled movement helps protect high-value equipment during installation.
Accurate Positioning
Precise crane and trolley movement supports alignment during generator and turbine assembly.
International Project Delivery
Manufacturing and shipment can be coordinated with overseas EPC construction milestones.
Application Scenarios
| Thermal Power Turbine Halls |
Installation of generator and turbine components. |
| Power Plant Construction |
Heavy equipment erection during new-unit construction. |
| Generator Maintenance |
Rotor, stator and auxiliary equipment handling during overhaul. |
| International EPC Projects |
Customized cranes supplied to overseas power-station construction sites. |
Why Choose Henan Mine Crane
- Henan Mine Crane can develop the crane from turbine-hall drawings and the unit erection sequence.
- Main/auxiliary hook configuration can be selected from the actual maintenance and installation lifts.
- Project documentation, manufacturing and shipment can be coordinated with EPC schedules.
- The same crane can be planned for both construction-stage lifting and long-term plant maintenance.
Frequently Asked Questions
What type of crane is used in a thermal power turbine hall?
A double-girder overhead crane is commonly used for generator and turbine installation and maintenance because it provides high capacity and full-bay coverage.
How is turbine-hall crane capacity selected?
Use the heaviest erection or maintenance lift, including lifting beam, hook block and rigging, then verify the required main and auxiliary hook duties.
What data is needed for an overseas power-plant crane quotation?
Provide turbine-hall drawings, capacity, span, lifting height, runway length, power supply, duty, speeds, main/auxiliary hook requirements, installation schedule and destination-country standards.
Request A Water Resources & Power Crane Solution
Send your load data, plant or workshop drawings, lifting sequence, operating environment and control requirements. Henan Mine Crane engineers will review the application and prepare a project-specific crane proposal.
Request A Quote
|
View Overhead Cranes
