Single Rubber-Tired Gantry Crane

For compact factory yards and constrained industrial areas handling beams or machinery where mobile lifting is needed but maneuvering space is limited.

Single Rubber-Tired Gantry Crane for compact factory yards— handle beams and machinery where working space is limited.

This page is written from a procurement perspective. The accessible source category identifies the product and its target application, but it does not publish one universal capacity, overall dimension, travel speed, turning radius, tire load, gradeability or power system for this exact product. Those items are therefore treated as project-specific rather than invented.

Quick Specifications

Request A Single Rubber-Tired Gantry Crane Quote

Product Overview

Single Rubber-Tired Gantry Crane for compact factory yards— handle beams and machinery where working space is limited.

A rubber-tired lifting carrier should be selected as both a crane and a mobile transport system. The lifting arrangement must safely support the load, while the travel system must fit the real route, turning space, ground condition and production cycle. For many projects, route data is as important as capacity.

Before quotation, provide a site layout and the largest load drawing. This allows the supplier to review the load envelope, clear width, lifting height, turning zones, surface capacity and pickup / set-down interfaces together.

Why Choose a Single Rubber-Tired Gantry Crane?

Compact-Yard Focus

The source explicitly targets working areas with limited space.

Beam & Machinery Handling

These are the source-listed load examples.

Mobile Alternative to Fixed Rails

Useful where a permanent runway would consume valuable space or limit future layout changes.

Project-Specific Compact Geometry

The final crane can be engineered around the minimum clear width, overall width and turning envelope required by the site.

Product Images

The current source category exposes one product image for this item. It is shown above as the main image and is not repeated here to avoid duplicate media on the final product page.

Main Equipment Systems

Technical Parameters

Source-Confirmed Facts & Buyer-Defined Options

Source-confirmed facts:

• Product name: Single Rubber-Tired Gantry Crane.
• Category model / family: Rubber-Tired Gantry Crane.
• Source application statement: Single Rubber-Tired Gantry Crane for compact factory yards— handle beams and machinery where working space is limited.

Buyer-defined items:

• Maximum load and load envelope
• Center of gravity and lifting points
• Required attachment / spreader
• Clear width and lifting / under-clearance
• Travel route and turning space
• Ground / pavement bearing conditions
• Moves per hour / shift
• Steering / control / power concept
• Outdoor wind / corrosion if applicable
• Commissioning and operator-training scope

Application Scenarios

How to Select the Right Single Rubber-Tired Gantry Crane

1. Measure the Tightest Route

Minimum aisle width, gate width and turning zone should be measured before selecting the crane.

2. Provide Load Dimensions

Beams and machinery may have different overhang / CG conditions.

3. Define Required Clear Width

The carrier must straddle the load and any support / vehicle.

4. Define Overall-Height Limit

Check doors, canopies and overhead services.

5. Check Pavement Capacity

Compact sites often include mixed floor / yard surfaces.

6. Clarify the 'Single' Structure in the Proposal

The accessible source names the product 'Single Rubber-Tired Gantry Crane'; final structural arrangement should be confirmed on the supplier drawing rather than assumed.

Compact Yard Clearance Data

Rubber-Tired Travel: What Buyers Should Confirm

Safety & Control: What Buyers Should Confirm

Installation, Commissioning & Maintenance

Before manufacture, freeze the load drawing, lifting points, route layout, minimum clearances, ground conditions, pickup / set-down positions and operating cycle. Because the equipment is mobile, site acceptance should verify not only lifting but also loaded travel, steering, braking and placement on the actual route.

Maintenance planning should cover the hoisting system, ropes / chains where fitted, attachment, brakes, tires, wheel / axle assemblies, steering components, drive system, structural connections, controls and safety devices. High-frequency applications should define inspection access and spare-part strategy before purchase.

What Information Do We Need for a Quote?

Frequently Asked Questions

What determines the correct lifting capacity?

Use the complete suspended load, including the load plus spreader, lifting beam, sling or other permanent attachment.

Why do you need a site route drawing?

A rubber-tired carrier is both a lifting machine and a transport machine. Route width, turning space, slope and pavement can change the required configuration.

Can the dimensions and steering arrangement be customized?

These items are project-specific on the accessible source page. They should be engineered from the actual load and route rather than selected from an assumed standard size.

What affects price most?

Load capacity, clear width, lifting height, route / steering requirements, tire / axle loading, attachment, duty, control / power system and environmental requirements are major design drivers.

What should be tested before acceptance?

The technical agreement should define load lifting, loaded travel, steering, braking, safety functions and any placement / productivity requirements that matter to the project.

Related Rubber-Tired Gantry Products

Request A Single Rubber-Tired Gantry Crane Quote

Send the maximum load, load dimensions, center of gravity, lifting points, required clearances, full travel-route drawing, ground / pavement information and handling frequency. Henan Mine Crane can then review the lifting and mobile-travel requirements together and prepare a project-specific configuration and quotation.

Request A Quote  |  View Gantry Cranes