MEN Double-Trolley Electromagnetic & Hook Gantry Crane
For steel yards that need two trolley positions and both electromagnetic and hook handling for magnetic steel products and general loads.
Henan Mine Crane men electromagnetic & hook gantry crane showing the primary gantry structure and lifting arrangement.
The MEN product is a double-trolley electromagnetic-and-hook general gantry crane. The source lists working class A3–A8 and general lifting devices including hooks and electromagnetic lifters.
The source also publishes magnet response of 0.5–1 second and 80–100 pickup cycles per hour for steel-transfer service. Buyers should treat these as source product data and define the actual travel distances, load geometry, magnet layout and required cycle before establishing a contractual throughput.
Quick Specifications
| Product Model |
MEN |
| Type-Test Product Name |
General Gantry Crane |
| Lifting Capacity |
Source-stated where published; otherwise project-specific |
| Span |
Source-stated where published; otherwise project-specific |
| Lifting Height |
Project-specific unless source-stated |
| Runway / Travel Length |
Project-specific |
| Working Duty |
Source-stated where published; otherwise selected from actual duty |
| Lifting Attachment |
According to the product and load |
| Control Method |
Source-supported options + project requirements |
| Operating Environment |
According to actual site conditions |
Best For: For steel yards that need two trolley positions and both electromagnetic and hook handling for magnetic steel products and general loads.
Request A MEN Electromagnetic & Hook Gantry Crane Quote
Product Overview
Product title identifies double-trolley electromagnetic and hook use.
Source working class A3–A8.
PLC module, HMI touch screen and WLK master controller are source-listed.
Any capacity, span, speed, synchronization accuracy, wind limit, temperature limit, throughput or other contractual value that is not explicitly published by the source should be engineered from the actual project and written into the technical agreement.
Why Choose MEN Electromagnetic & Hook Gantry Crane?
Magnetic + Hook Handling
One gantry platform can serve steel pickup and conventional lifting.
Two-Trolley Layout
Allows the project to allocate separate or combined trolley duties.
A3–A8 Source Duty Range
Supports selection from light to demanding operating cycles.
Fast Magnet Response
Source publishes 0.5–1 s pickup/release response.
PLC / HMI Control
Source-listed controls support structured operator commands and status display.
Product Images
Official source image associated with the electromagnetic gantry crane, magnetic attachment or steel-handling application.
|
Official source image associated with the electromagnetic gantry crane, magnetic attachment or steel-handling application.
|
Main Crane Components
| Gantry Structure |
Main girder(s), legs and end structures selected from the exact product layout, load, span and site conditions. |
| Hoisting / Trolley System |
Configured around the product's source-described lifting mechanism and operating cycle. |
| Lifting Attachment |
Hook, grab, magnet, gantry hook, gate lifting device or construction attachment according to the product. |
| Gantry Travel System |
Moves the crane along the fixed ground rail or semi-gantry runway. |
| Electrical & Control System |
Configured from source-supported controls and project-specific safety / automation requirements. |
Technical Parameters
| Model |
MEN |
| Product Type |
MEN Double-Trolley Electromagnetic & Hook Gantry Crane |
| Type-Test Product Name |
General Gantry Crane |
| Capacity |
Project-specific unless source-stated |
| Span |
Project-specific unless source-stated |
| Lifting Height |
Project-specific unless source-stated |
| Runway Length |
Project-specific |
| Hoisting Speed |
Project-specific |
| Trolley Travel Speed |
Project-specific |
| Gantry Travel Speed |
Project-specific |
| Working Duty |
Project-specific unless source-stated |
| Control Method |
Project-specific |
| Power Supply |
According to site electrical conditions |
| Site Environment |
According to wind, rain, dust, corrosion and temperature |
Source-Confirmed Features & Buyer-Defined Options
Source-confirmed product facts:
- Product title identifies double-trolley electromagnetic and hook use.
- Source working class A3–A8.
- PLC module, HMI touch screen and WLK master controller are source-listed.
- Magnet pickup/release response is source-stated at 0.5–1 s.
- Source states 80–100 pickup cycles per hour in steel-transfer service.
- Finite-element analysis is used to optimize main girder, legs and end-girder stress distribution.
Buyer-defined items:
- Maximum suspended load including attachment
- Span / lifting height / runway length
- Load geometry and lifting points
- Operating frequency and duty
- Outdoor / process environment
- Control, safety and automation scope
- Rail / foundation or building-runway interface
- Installation and commissioning scope
Application Scenarios
| Steel Yards |
Magnetic steel and general cargo handling. |
| Billet / Section Storage |
Repeated magnetic pickup. |
| Fabrication Yards |
Hook lifting plus magnetic steel movement. |
| Ports / Stockyards |
Mixed steel handling on fixed rails. |
How to Select the Right MEN Electromagnetic & Hook Gantry Crane
1. Define Magnetic Load
Material type, dimensions, temperature and pickup surface affect magnet selection.
2. Define Hook Load
Provide the heaviest non-magnetic general load.
3. Define Trolley Duties
State which trolley uses which attachment and whether simultaneous operation is required.
4. Define Cycle Target
Travel distances must be included before using the source cycle data as a project target.
5. Define Power-Loss Magnet Safety
State required emergency behavior; the source page does not publish a backup-hold duration.
Source Magnet Performance vs Project Guarantee
| Magnet Response |
0.5–1 s source-stated. |
| Steel Pickup Cycles |
80–100 / hour source-stated. |
| Duty |
A3–A8 source range. |
| Project Guarantee |
Define complete travel cycle and acceptance method separately. |
Safety & Control: What Buyers Should Confirm
• Rated capacity / overload protection and attachment weight
• Upper / lower hoisting limits and trolley / gantry travel limits
• Brake and emergency-stop requirements
• Rail-end stops, buffers, anti-collision and wind protection where applicable
• Attachment-specific safety: grab, magnet, metallurgical, gate, tipping or multi-trolley functions
• Operator visibility, remote-control or camera requirements
• Automation / linked-crane fallback and recovery procedures where applicable
• Factory and site load / functional acceptance tests
Installation & Maintenance
Before manufacture, confirm rail center distance, runway length, rail elevation, foundation or building-runway capacity, available lifting height, process clearances, power supply and erection access. Outdoor projects should include wind, rain, temperature, corrosion and anchoring conditions.
Maintenance should follow the final supplied crane manual and actual duty. In addition to hoisting, brakes, ropes, wheels, drives, rails, limits and electrical systems, inspect product-specific devices such as grabs, magnets, gantry hooks, gate equipment, tipping mechanisms, encoders, cameras or automation hardware.
What Information Do We Need for a Quote?
| 1 |
Magnetic material / dimensions / temperature |
| 2 |
Maximum magnetic load |
| 3 |
Maximum hook load |
| 4 |
Magnet arrangement / self-weight |
| 5 |
Maximum load per trolley |
| 6 |
Combined operation requirement |
| 7 |
Span / lifting height / runway length |
| 8 |
A3–A8 duty inputs |
| 9 |
Required cycles/hour |
| 10 |
Power-loss magnet safety requirement |
| 11 |
Control method |
| 12 |
Yard drawing / destination |
Frequently Asked Questions
How is final crane capacity selected?
Use the complete suspended load, including the load plus grab, magnet, gantry hook, lifting beam, rigging or any other below-the-hook equipment.
Can span and lifting height be customized?
Yes. Unless the source publishes a range, these are project-specific and should be selected from the rail layout and working envelope.
What site drawing should I send?
Send a plan and cross-section showing rails, foundations or building runway, loading positions, obstacles, travel length and available clearances.
Can control or automation be customized?
Where the source supports VFD, PLC, linked operation, cameras, access control or other functions, the final scope should be defined from the buyer's process and acceptance requirements.
How should source-reported performance numbers be used?
Treat them as source product data. If a value is contract-critical for a new project, define the test conditions and acceptance method in the technical agreement.
Related Gantry Crane Products
MDG L-Type Gantry Crane
MEH Double-Trolley Truss Gantry Crane
MN Grab & Hook Dual-Purpose Gantry Crane
MGBE Double-Trolley Semi-Gantry Crane
MC Electromagnetic Gantry Crane
MDE Double-Trolley L-Type Gantry Crane
Request A MEN Electromagnetic & Hook Gantry Crane Quote
Send your maximum load, span, lifting height, runway length, site drawing, operating cycle, load geometry, lifting attachment and special control / environment requirements. Henan Mine Crane engineers can then review the actual process and prepare a project-specific configuration and quotation.
Request A Quote | View Gantry Cranes
