Henan Mine Crane manufactured and dispatched two 1000t gantry cranes for the project. Each crane combines very high lifting capacity with a high-strength steel structure and an intelligent control system designed for stable, safe and efficient operation.

Henan Mine Crane developed a fully automatic steel pipe transfer crane to connect production and storage operations. The system receives work instructions digitally, plans the transfer route, travels to the required pickup position, handles the steel pipes and returns progress information without depending on continuous manual crane operation.

Large river-bridge foundations can use steel caissons that are excavated internally while sinking toward their design elevation. This is not a conventional lifting-only application. The crane system must work around the caisson structure

Steel box-girder bridge construction requires long fabricated sections to be lifted and positioned across a wide roadway or river-adjacent working corridor. A conventional workshop crane cannot provide this coverage when the lifting zone extends well beyond a building structure.

Bridge steel fabrication moves large structural sections between welding, machining, inspection and trial-assembly positions. Loads must travel efficiently across the production area, then approach fixtures and mating points at controlled low speed.

Cable-stayed bridge construction requires fabricated steel-tower sections to be lifted, transferred and aligned before final erection. Individual modules can weigh hundreds of tonnes and may have large dimensions

Metro excavation creates a continuous flow of tunnel muck that must be lifted from below ground, transferred away from the shaft opening and discharged for site transport